＃20
＃20
With Muratec machines, even if they stop,
you can restart them right from that spot
with just pushing a button!
Challenges
Points of the problem faced by the customer
“As the quality of the blank workpieces being varied widely, the cutting tools wore out quickly and the machine stopped several times in a day due to the heavy machining load.”
“Every time the machine stopped, the operator had to check the status inside the machine, remove the workpieces remaining there, and return each axis to zero-positions before restarting production. These recovery works took much time.”
Solutions
According to the customer, a lot of working time was lost from the time machine stopped to restarting production. They also estimated that there might be no improvement on the material quality. In such circumstances, they saw our YouTube channel and contacted us.
●Loader Re-start Function
Muratec's loaders come standard with a workpiece status monitoring function.
Therefore, it is possible to significantly reduce the time required for the operator to restart the production.
Higher Productivity
By choosing the Muratec product, the customer has significantly reduced the time required for the recovery, which was their main matter.
“In addition to the improvement of machine productivity, the recovery work can now be carried out very smoothly regardless of the operator's skill level”, said the customer.
RELATION
Related page
![](https://ferret-one.akamaized.net/resized_images/67e3db9fdb82e703eb160d73/original.{"image_content_type"=>"png"}?utime=1742986143)
CONTACT
If you are considering automated production,
please contact Muratec.
If you have any questions, please contact us here
