
A customer producing tubular components was struggling with chip control during internal diameter machining. Because of the material's ductility, long, spiral-shaped chips frequently formed and accumulated inside the workpiece.
The buildup sometimes became severe enough to trigger the machine's overload protection system, resulting in unexpected downtime. Even when machining was completed without interruption, chips could remain trapped inside the bore and be released with the finished part, creating quality concerns and additional handling requirements.
Despite multiple attempts to address the problem, the customer had yet to identify a reliable method to prevent chip accumulation and ensure stable production.
After receiving the inquiry, Muratec's after-sales team worked closely with the customer to develop an effective solution.
The proposed answer was a spindle-through-bore chip-evacuation system designed to improve chip flow and prevent chip accumulation during internal-diameter machining.
The system incorporates a hollow spindle cylinder that extends through the rear of the machine, creating a dedicated path for chip evacuation. When paired with a hollow chuck, long, stringy chips can be discharged directly out of the back of the machine rather than falling into the machining area.
In addition, the system uses air or coolant generated during machining to propel chips along the evacuation path. This enables continuous chip removal during cutting, helping maintain stable operation, minimize downtime, and reduce the risk of chip-related interruptions.

By implementing this solution, the customer successfully eliminated chip-control issues associated with internal-diameter machining.
A common approach to managing long chips is to break them into smaller segments. However, doing so often requires changes to tooling, insert selection, or the addition of a high-pressure coolant system. Achieving consistent results can also involve extensive testing and fine-tuning of cutting parameters.
Muratec's solution takes a different approach. Rather than attempting to control or break the chips, it allows long chips to be evacuated directly from the machine. This helps reduce the need for process optimization efforts and additional equipment, while minimizing the time and cost required to address chip-related challenges.
If you are experiencing similar chip control issues, Muratec can help. Our team will work with you to identify the most effective solution for your application and production requirements.
RELATION
CONTACT
If you have any questions, please contact us here